Your Basket 0 items.
130mm (5 inch) (35)
150mm (6 inch) (35)
180mm (7 inch) (34)
200mm (8 inch) (34)


RES 2 EPDM Flashing 175-275mm (7-11 inch) - Low Temp.

Other Customers Also Purchased

Locking Band
The Locking Band is used to secure two parts of the flue together. A Locking Band is ...

Straight Length 1000mm
1000mm Pipe Length. The effective installed length is 960mm - a Locking Band is ...

45 Deg Elbow - 040
45˚ Bend allowing you a change in direction. Bends are usually used to put an offset into the ...

Suitable for tiled roofs with external pipe diameters of 7inch to 12inch (175mm to 300mm), the aluminium base size is 27inch x 27inch.

Availability:  In Stock

Offers Description Details Dimensions Guides

Suitable for tiled roofs and is temperature resistance -55°C to 135°C

Enviromentally safe lead free aluminium base. The EPDM rubber upstand has a 20 year life. The built in 20˚ pitch allows adaptability to almost any roof pitch including 45˚. The pull tab design and easy smooth tear grooving is intended to eliminate cutting by knife and allow for a circular hole.

1. Pull tab design to correct size using pliers, alternatively cut using a stanley knife.
2.Apply silicone sealant to back of flashing.
3.Remove tiles around pipe and slide flashing over pipe.
4. Fasten Flashing to the roof.
5. Cut tile to fit tp the top of the Flashing allowing the bottom of the flashing metal base to sit on top of the tiles.

Item RES 2 EPDM Flashing 175-275mm (7-11 inch) - Low Temp.
Base Size Dia.: 660 x 660mm
Pipe External: 175-275mm
Roof Pitch: 0-45º
Temperature: 135º C