Your Basket 0 items.
 
   
   
 
 
 
Categories
130mm (5 inch) (35)
150mm (6 inch) (35)
180mm (7 inch) (34)
200mm (8 inch) (34)

VIDEOS

No.7 Silicone Masterflash 152-280mm (6 to 11 inch) - High Temp.
 

Other Customers Also Purchased

Locking Band
The Locking Band is used to secure two parts of the flue together. A Locking Band is ...

Straight Length 1000mm
1000mm Pipe Length. The effective installed length is 960mm - a Locking Band is ...

45 Deg Elbow - 040
45˚ Bend allowing you a change in direction. Bends are usually used to put an offset into the ...

Suitable for profiled sheeting and flat panel surfaces with external pipe diameters of (6 to 11 inch) / 152 to 280mm.

Availability:  In Stock
Quantity:

Offers Description Details Dimensions Guides
Fixing Kit

APPLICATION
Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -74°C to 260°C

CONSTRUCTION
Made of SILICONE, these flashings are componded specifically for maximum resistance to weathering due to ozone and ultraviolet light.
Fast, one piece construction allows for easy on-site installation in usually 5 minutes.
The base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

INSTALLATION
1. Choose pipe opening and trim using a stanley knife or scissors.
2. Slide flashing over pipe (you may need to lubricate the flashing with some grease).
3. Form the flashing to the same profile as the roof.
4. Apply sealant (contained in the Fixing Kit).
5. Fasten using the screws and caps (supplied in the Fixing Kit).

TWO Standard Fixing Kits are required to install this flashing.

SKU FLASHING-702
Item No.7 Silicone Masterflash 152-280mm (6 to 11 inch) - High Temp.
Base Size Dia.: 355 x 355mm
Pipe External: 114-292mm
Roof Pitch: 0-45º
Temperature: 260º C