Your Basket 0 items.
 
   
   
 
 
 
Categories
130mm (5 inch) (35)
150mm (6 inch) (35)
180mm (7 inch) (34)
200mm (8 inch) (34)

VIDEOS

Adj Wall Support 70-120mm+ Lock Band
 

Other Customers Also Purchased

Locking Band
The Locking Band is used to secure two parts of the flue together. A Locking Band is ...

Straight Length 1000mm
1000mm Pipe Length. The effective installed length is 960mm - a Locking Band is ...

45 Deg Elbow - 040
45ňö Bend allowing you a change in direction. Bends are usually used to put an offset into the ...

Used to connect to elements at the joints using its integrated locking band and also fixing the chimney to the wall. This wall support allows regulation between the chimney and the wall from 70mm to 120mm. A wall support has to be installed every 2 or 3 metres. This suppoort withstands both the lateral and vertical (weight) of the flue. By using this support you do not need to purchase a locking band.

Availability:  In Stock
Quantity:

Offers Description Details Dimensions Guides

APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, condensing boilers and any solid fuel appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel. Inner skin is made from 316 grade stainless steel. Insulation is compressed rockwool. All parts are fully welded ‚Äď making DW suitable for condensing appliances.
Distance to combustibles is 60mm.

APPROVALS
DW is HETAS Approved and is CE marked.
Designation Number is
EN1856-1 T450 N1 D V2 L50040 G60.

INSTALLATION
DW Twin Wall Insulated Chimney has a simple push fit joint system, this is then secured by using a Locking Band - the simplest and strongest construction system on the market today.
Make sure that you keep a distance of 60mm from the outside of the flue to any combustible material (wood, plaster board).

SKU TWIN-WALL-8-052
Item Adj Wall Support 70-120mm+ Lock Band
Designation: EN1856-1 T450 N1 D V2 L50040 G60
System: Dinak DW
Inner Material: 316L Stainless Steel - 0.40mm thick
Outer Material: 304 Stainless Steel - 0.40mm thick
Fuels: Wood, Oil, Gas, Low sulpher coal
Approvals: HETAS / CE
Distance to Combustibles: 60mm